High-performance materials and coatings for Industry
Central European Institute of Technology
Purkyňova 656/123
612 00 Brno
Results
Flow-through Gas Phase Photocatalysis Using TiO2 Nanotubes on Wirelessly…
12.07.2023
In this work, for the first time 3D Ti-Nb meshes of different composition, i.e., Ti, Ti-1Nb, Ti-5Nb, and Ti-10 Nb, were produced by direct ink writing. This additive manufacturing method allows…
Read more »
Microstructure and reduction behavior of Mo powders doped with La2O3 and ZrO2…
11.07.2023
In the present contribution, we used the spray drying method for the preparation of molybdenum-based composite powders, which belong to an important class of high-temperature structural materials –…
Read more »
The first solid-state route to luminescent Au(I)—glutathionate and its pH…
05.06.2023
There is still a need for synthetic approaches that are much faster, easier to scale up, more robust and efficient for generating gold(I)–thiolates that can be easily converted into gold–thiolate…
Read more »
Pressure-less spark plasma sintering of 3D-plotted titanium porous structures
27.12.2022
Adelia Kashimbetova, Karel Slámečka, Sebastián Díaz-de-la-Torre, José C. Méndez-García, Bernardo Hernández-Morales, Maria Cristina Piña-Barba, David Hui, Ladislav Čelko, Edgar B. Montufar, Pressure…
Read more »
Fatigue behaviour of titanium scaffolds with hierarchical porosity produced by…
07.12.2022
Karel Slámečka, Adelia Kashimbetova, Jaroslav Pokluda, Tomáš Zikmund, Jozef Kaiser, Edgar B. Montufar, Ladislav Čelko, Fatigue behaviour of titanium scaffolds with hierarchical porosity produced by…
Read more »
Robocasting Additive Manufacturing of Titanium and Titanium Alloys: A Review
16.09.2022
Oliver-Urrutia, C., Kashimbetova, A., Slámečka, K. et al. Robocasting Additive Manufacturing of Titanium and Titanium Alloys: A Review. Trans Indian Inst Met 76, 389–402 (2023). https://doi.org/10…
Read more »
Implications of unconventional setting conditions on the mechanical strength of…
05.02.2022
KASHIMBETOVA, A.; SLÁMEČKA, K.; CASAL-LUNA, M.; OLIVER-URRUTIA, C.; RAVASZOVÁ, S.; DVOŘÁK, K.; ČELKO, L.; MONTUFAR, E. B.Implications of unconventional setting conditions on the mechanical strength…
Read more »
Anodic TiO2 Nanotubes on 3D-Printed Titanium Meshes for Photocatalytic…
05.10.2021
SOPHA, H.; KASHIMBETOVA, A.; HROMÁDKO, L.; SALDAN, I.; ČELKO, L.; MONTUFAR JIMENEZ, E.; MACÁK, J. Anodic TiO2 Nanotubes on 3D-Printed Titanium Meshes for Photocatalytic Applications. Nano Letters,…
Read more »
High-energy ball milling and spark plasma sintering of molybdenum - lanthanum…
05.10.2021
ČELKO, L.; TKACHENKO, S.; CASAS LUNA, M.; DYČKOVÁ, L.; BEDNAŘÍKOVÁ, V.; REMEŠOVÁ, M.; KOMAROV, P.; DEÁK, A.; BALÁŽ, M.; CRAWFORD, D.; DIAZ-DE-LA-TORRE, S.; BODOKU, E.; CIHLÁŘ, J. High-energy ball…
Read more »
Characterization of porosity and hollow defects in ceramic objects built by…
03.09.2021
ČELKO, L.; GUTIÉRREZ CANO, V.; CASAS LUNA, M.; MATULA, J.; OLIVER-URRUTIA, C.; REMEŠOVÁ, M.; DVOŘÁK, K.; ZIKMUND, T.; KAISER, J.; MONTUFAR JIMENEZ, E. Characterization of porosity and hollow…
Read more »
Corrosion behaviour of WE43 magnesium alloy printed using selective laser…
18.08.2021
SUCHÝ, J.; KLAKURKOVÁ, L.; MAN, O.; REMEŠOVÁ, M.; HORYNOVÁ, M.; PALOUŠEK, D.; KOUTNÝ, D.; KRIŠTOFOVÁ, P.; VOJTĚCH, D.; ČELKO, L. Corrosion behaviour of WE43 magnesium alloy printed using selective…
Read more »
Effect of Laser Parameters on Processing of Biodegradable Magnesium Alloy WE43…
26.06.2020
SUCHÝ, J.; HORYNOVÁ, M.; KLAKURKOVÁ, L.; PALOUŠEK, D.; KOUTNÝ, D.; ČELKO, L. Effect of Laser Parameters on Processing of Biodegradable Magnesium Alloy WE43 via Selective Laser Melting Method.…
Read more »
Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture –…
29.05.2020
CASAS LUNA, M.; TORRES RODRÍGUEZ, J.; Valdés-Martínez, O. U.; Obradović, N.; SLÁMEČKA, K.; MACA, K.; KAISER, J.; MONTUFAR JIMENEZ, E.; ČELKO, L. Robocasting of controlled porous CaSiO3–SiO2…
Read more »
Effects of Cryopreservation on Cell Metabolic Activity and Function of…
21.05.2020
HERNANDEZ TAPIA, L.; FOHLEROVÁ, Z.; ŽÍDEK, J.; ALVAREZ-PEREZ, M.; ČELKO, L.; KAISER, J.; MONTUFAR JIMENEZ, E. Effects of Cryopreservation on Cell Metabolic Activity and Function of Biofabricated…
Read more »
Effects of anodizing conditions and the addition of Al2O3/PTFE particles on the…
28.02.2020
REMEŠOVÁ, M.; TKACHENKO, S.; KVARDA, D.; ROČŇÁKOVÁ, I.; GOLLAS, B.; MENELAOU, M.; ČELKO, L.; KAISER, J. Effects of anodizing conditions and the addition of Al2O3/PTFE particles on the microstructure…
Read more »
Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY plus YSZ thermal…
14.02.2020
SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY plus YSZ thermal barrier coatings: Phenomenon…
Read more »
Syntéza a stanovenie fyzikálno-chemických vlastností pokročilého systému BAO…
31.01.2020
RAVASZOVÁ, S.; DVOŘÁK, K.; SKALKA, P.; CASAS LUNA, M.; JECH, D.; ČELKO, L. Syntéza a stanovenie fyzikálno-chemických vlastností pokročilého systému BAO-MGO-AL2O3-SIO2 ako ochranného náterového…
Read more »
SLM process parameters development of Cu-alloy Cu7.2Ni1.8Si1Cr
04.04.2019
Palousek, D., Kocica, M., Pantelejev, L., Klakurkova, L., Celko, L., Koutny, D. and Kaiser, J. (2019), "SLM process parameters development of Cu-alloy Cu7.2Ni1.8Si1Cr", Rapid Prototyping Journal, Vol…
Read more »
Spark Plasma Extrusion and the Thermal Barrier Concept
02.01.2019
ČELKO, L.; MENELAOU, M.; CASAS LUNA, M.; HORYNOVÁ, M.; MUSÁLEK, T.; REMEŠOVÁ, M.; DÍAZ DE LA TORRE, S.; MORSI, K.; KAISER, J. Spark Plasma Extrusion and the Thermal Barrier Concept. METALLURGICAL AND…
Read more »
In vivo efficiency of antimicrobial inorganic bone grafts in osteomyelitis…
28.11.2018
MESTRES, G.; FERNANDEZ-YAGUE, M. A.; PASTORINO, D.; MONTUFAR JIMENEZ, E.; CANAL, C.; MANZANARES-CESPEDES, M. C. ; GINEBRA, M. P. In vivo efficiency of antimicrobial inorganic bone grafts in…
Read more »
Optimization of Molybdenum Powder Milling Parameters
15.09.2018
Dycková L., Komarov P., Remešová M., Dycka M., Dvorák K., Menelaou M., Celko L. Optimization of molybdenum powder milling parameters. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) =…
Read more »
Chemical Stability of Tricalcium Phosphate–Iron Composite during Spark Plasma…
01.09.2018
CASAS LUNA, M.; HORYNOVÁ, M.; TKACHENKO, S.; KLAKURKOVÁ, L.; ČELKO, L.; DÍAZ DE LA TORRE, S.; MONTUFAR JIMENEZ, E. Chemical stability of tricalcium phosphate - iron composite during spark plasma…
Read more »
Feasibility of Nanoparticle-Enhanced Laser Ablation Inductively Coupled Plasma…
21.08.2018
SALAJKOVÁ, Z.; HOLÁ, M.; HRDLIČKA, A.; POŘÍZKA, P.; NOVOTNÝ, K.; ČELKO, L.; ŠPERKA, P.; PROCHAZKA, D.; NOVOTNÝ, J.; MODLITBOVÁ, P.; KANICKÝ, V.; KAISER, J. Feasibility of nanoparticles enhanced laser…
Read more »
Deposition of hydroxyapatite and tricalcium phosphate coatings by suspension…
06.08.2018
I. Ročňáková, K. Slámečka, E.B. Montufar, M. Remešová, L. Dyčková, A. Břínek, D. Jech, K Dvořák, L. Čelko, J. Kaiser. Deposition of hydroxyapatite and tricalcium phosphate coatings by suspension…
Read more »
Design of tailored biodegradable implants: The effect of voltage on…
21.06.2018
HORYNOVÁ, M.; REMEŠOVÁ, M.; KLAKURKOVÁ, L.; DVOŘÁK, K.; ROČŇÁKOVÁ, I.; YAN, S.; ČELKO, L.; SONG, G. L. Design of tailored biodegradable implants: The effect of voltageon electrodeposited calcium…
Read more »
Accelerated hardening of nanotextured 3D-plotted self-setting calcium phosphate…
26.05.2018
S. Raymond, Y. Maazouz, E.B. Montufar, R.A. Perez, B. González, J. Konka, J. Kaiser, M.P. Ginebra. Accelerated hardening of nanotextured 3D-plotted self-setting calcium phosphate inks. Acta…
Read more »
Wear of grinding rotors with thermally-sprayed coatings in a high-speed mill
25.05.2018
TKACHENKO, S.; DVOŘÁK, K.; JECH, D.; SLÁMEČKA, K.; KLAKURKOVÁ, L.; PALOUŠEK, D.; ČELKO, L. Wear of grinding rotors with thermally-sprayed coatings in a high-speed mill. WEAR, 2018, roč. 412-413, č. 1…
Read more »
Influence of the cut direction through the semi-finished product on the…
15.05.2018
MOURALOVÁ, K.; KLAKURKOVÁ, L.; MATOUŠEK, R.; PROKEŠ, T.; HRDÝ, R.; KAŇA, V. Influence of the Cut Direction through the Semi-Finished Product on the Occurrence of Cracks for X210Cr12 Steel Using WEDM.…
Read more »
Low cycle fatigue performance of Ni-based superalloy coated with complex…
01.05.2018
ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; CHRÁSKA, T.; JECH, D.; GEJDOŠ, P. Low cycle fatigue performance of Ni-based superalloy coated with complex thermal barrier coating. MATERIALS CHARACTERIZATION, 2018…
Read more »
Metal matrix to ceramic matrix transition via feedstock processing of SPS…
12.03.2018
S. Tkachenko, J. Cizek, R. Mušálek, K. Dvořák, Z. Spotz, E.B. Montufar, T. Chráska, I. Křupka, L. Čelko. Metal matrix to ceramic matrix transition via feedstock processing of SPS titanium composites…
Read more »
High strength, biodegradable and cytocompatible alpha tricalcium phosphate-iron…
06.03.2018
E.B. Montufar, M. Casas-Luna, M. Horynová, S. Tkachenko, Z. Fohlerová, S. Diaz-de-la-Torre, K. Dvorak, L. Celko, J. Kaiser. High strength, biodegradable…
Read more »
Strength and fracture mechanism of iron reinforced tricalcium phosphate cermet…
05.03.2018
S. Tkachenko, M. Horynová, M. Casas-Luna, S. Diaz-de-la-Torre, K. Dvorak, L. Celko, J. Kaiser, E.B. Montufar. Strength and fracture mechanism of iron reinforced tricalcium phosphate cermet fabricated…
Read more »
Finite element simulation of stresses in a plasma-sprayed thermal barrier…
09.01.2018
SKALKA, P.; SLÁMEČKA, K.; POKLUDA, J.; ČELKO, L. Finite element simulation of stresses in a plasma-sprayed thermal barrier coating with a crack at the TGO/bond-coat interface. Surface and Coatings…
Read more »
A state-of-the-art review on passivation and biofouling of Ti and its alloys in…
10.11.2017
YAN, S.; SONG, G.; LI, Z.; WANG, H.; ZHENG, D.; CAO F.; HORYNOVÁ, M.; DARGUSCH, M. S.; ZHOU, L. A state-of-the-art review on passivation and biofouling of Ti and itsalloys in marine environment.…
Read more »
Interpenetrated magnesium–tricalcium phosphate composite: manufacture,…
02.10.2017
M. Casas-Luna, S. Tkachenko, M. Horynová, L. Klakurková, P. Gejdos, S. Diaz-de-la-Torre, L. Celko, J. Kaiser, E.B. Montufar. Interpenetrated magnesium–tricalcium phosphate composite: manufacture,…
Read more »
The Effect of the Wear of Rotor Pins on Grinding Efficiency in a High-speed…
26.09.2017
DVOŘÁK, K.; DOLÁK, D.; PALOUŠEK, D.; ČELKO, L.; JECH, D. The Effect of the Wear of Rotor Pins on Grinding Efficiency in a High-speed Disintegrator. Materials Science, 2018, roč. 24, č. 1, s. 29-34.…
Read more »
Analysis of surface morphology and topography of pure aluminium machined using…
22.09.2017
MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; BEDNÁŘ, J.; BENEŠ, L.; ZAHRADNÍČEK, R. Analysis of the surface morphology and topography of pure aluminium machined using WEDM. MEASUREMENT, Journal of the…
Read more »
Spark plasma sintering of load-bearing iron-carbon nanotube-tricalcium…
03.10.2016
E.B. Montufar, M. Horynová, M. Casas-Luna, S. Diaz-de-la-Torre, L. Celko, L. Klakurková, Z. Spotz, G. Diéguez-Trejo, Z. Fohlerová, K. Dvorak, T. Zikmund, J. Kaiser. Spark plasma sintering of load…
Read more »
Assessment of localized corrosion under simulated physiological conditions of…
01.10.2016
I. Ročňáková, E.B. Montufar, M. Horynová, T. Zikmund, K. Novotný, L. Klakurková, L. Celko, G.L. Song, J. Kaiser. Assessment of localized corrosion under simulated physiological conditions of…
Read more »